Taga Harmony TOS-415 V.2 handleiding

Handleiding

123456789101112/ 12

Afdrukken

Je bekijkt pagina 9 van 12

Run the speaker cable to location where the speaker is to be installed. Leave about 20 cm

(0.66 feet) of extra cable (if the speaker cable is hidden in a wall or ceiling make a hole in the

center of the location of the speaker).

Speaker Mounting

Mounting accessories - may not be included with the product and must be

purchased separately.

The number of installation points depends on the type of mounting surface - we

recommend minimum 2 pieces per bracket unless provided otherwise.

Depending on the mounting surface use appropriate mounting accessories

(expansions plugs, screws or wall anchors) - ask your local dealer or installer

for advice.

TOS using U mounting bracket with horizontal regulation

Fig. 1

- Run the speaker cable through an installation hole in the middle of the bracket.

- Position the bracket on the mounting surface where you want to install the speaker, and mark

installation points.

- Use mounting accessories appropriate for the surface and install them in the mounting surface.

- Firmly mount the bracket.

Fig. 2

- Connect the speaker cable to the speaker terminals.

- Slide the speaker into the bracket and screw top and bottom bracket knobs to secure the

speaker in the bracket.

- Adjust the horizontal position of the speaker and fasten (screw in rmly) the knobs.

In the future the knobs can be loosen to adjust the speaker horizontal position.

9

1 2

123456789101112/ 12

Bekijk gratis de handleiding van Taga Harmony TOS-415 V.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Speaker