T Nb MHMECA handleiding
Handleiding
Je bekijkt pagina 12 van 30
MHMECA
1b
For desks with a thickness of 10 to 48 mm
If the VESA panel is too tight to rotate, loosen the screw with a hex key.
2
1. Fixing to a desk or table
Diagram 1.A / 1.B Choose between 2 types of xing, with or without drilling.
2. Fixing to the monitor
Diagram 2 Screw the two upper screws into your monitor, then slide into the upper slots of the
VESA plate of the screen arm. Hold it in position, then secure the lower screws.
3. Adjusting the arms
3
Important: To avoid damaging the monitor and the mount, always keep the arm in a horizontal
position during adjustments, as illustrated in the diagram.
To balance the arms correctly once the monitor(s) are xed, adjust the spring tension using the
Allen key (P) as shown in diagram 3.
If the arm drops: Turn the adjustment screw towards «+» until it stays in a stationary position.
If the arm rises or does not move easily: Turn the adjustment screw towards «-».
Important: Do not overtighten the adjustment screw.
4. Install the cable pass-throughs
4
Place the cable pass-throughs into the designated slots, then clip them in by sliding them upward
to lock the installation.
5. Adjust tilt and rotation angle
5
Adjust the desired tilt and rotation angle by tightening or loosening the screws indicated
in the diagram.
NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at
info@t-nb.com. Maintenance, troubleshooting, miscellaneous information about this product,
please visit our website: www.t-nb.com
ES NUESTRO AGRADECIMIENTO
Enhorabuena por su compra y gracias por la conanza depositada en T’nB. Nuestros
productos cumplen los reglamentos y las normativas vigentes. Le recomendamos que lea
atentamente las instrucciones y consignas de seguridad antes de utilizar este dispositivo, y
que conserve el presente manual.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- La garantía no se aplicará en caso de mal uso.
Bekijk gratis de handleiding van T Nb MHMECA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | T Nb |
| Model | MHMECA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3106 MB |
