T Nb MHMECA handleiding
Handleiding
Je bekijkt pagina 11 van 30
CAUTION: Use of products heavier than the nominal weights indicated may result in instability
causing potential injury.
Brackets must be joined as specied in the installation instructions. Incorrect installation may
result in damage or serious injury to persons.
Appropriate safety equipment and tools must be used. This product should be installed by
professionals only.
Ensure that the support surface safely supports the combined weight of the equipment and all
associated materials and components.
Use the mounting screws supplied and DO NOT OVERTIGHTEN the mounting screws.
This product contains small parts that can cause choking if swallowed. Keep these parts away
from children.
This product is intended for indoor use only. Using this product outdoors may result in product
failure or personal injury.
IMPORTANT. Before installation, make sure you have received all parts according to the
component checklist. If a part is missing or damaged, call your local distributor for replacement.
MAINTENANCE: At regular intervals (at least every three months) check that the bracket is
properly installed, safe and reliable.
COMPATIBILITY
CONTENT
1
MHMECADUAL:2 articulated arms
MHMECA: 1 articulated arm
INSTALLATION WITHOUT DRILLING
1a
MHMECA / MHMECADUAL
Clamp screws for desks with a thickness between 10 and 80 mm
• For desks with a thickness of 10 to 50 mm, see diagrams 1.1.
• For desks with a thickness of 50 to 80 mm, see diagrams 1.2.
INSTALLATION WITH DRILLING
MHMECADUAL
1b
For desks with a thickness of 10 to 48 mm
If the VESA panel is too tight to rotate, loosen the screw with a hex key.
2
Bekijk gratis de handleiding van T Nb MHMECA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | T Nb |
| Model | MHMECA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3106 MB |
