SurgeX SA-20-AR handleiding
Handleiding
Je bekijkt pagina 19 van 27
SA-20-AR User Manual
____________________________________________________________________________________________________________
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com 18
AutoPing Commands
Command
Description
Admin
Fact Def
get autoping
Returns all AutoPing settings currently in use. Example:
AutoPing 1 AutoPing 2
IP Address: 10.1.2.36 0.0.0.0
Frequency: 60 10
Fail Count: 3 3
Status: OK OK
Trigger Count: 0 0
--------------------------------------
Mode: Single
Action: On-Latch
Ok
Yes
set autoping < 1 | 2 > ipaddress < dotted decimal >
Sets the IP address to be pinged for AutoPing 1 or 2.
Yes
0.0.0.0
set autoping < 1 | 2 > frequency < 1-999 >
Sets the frequency (how often the ping is sent) for
AutoPing 1 or 2 in seconds.
Yes
10
set autoping < 1 | 2 > failcount < 1-999 >
Sets the number of consecutive failures the AutoPings
must detect before the AutoPing considers the pinged
device to be failed.
Yes
3
set autoping mode < single | and | or >
Sets single AutoPing (AutoPing 1) or two AutoPing
relationship AND or OR.
Yes
AND
set autoping action < none | on-latch | on-follow | off-latch |
off-follow | cycle | cycle-once >
Sets the action to be performed when the AutoPing is
triggered.
Yes
None
User Commands
Command
Description
Admin
Fact Def
set password < user | admin > < old > < new > < repeat >
Sets the password of the User or Administrator.
Yes
user | admin
Bekijk gratis de handleiding van SurgeX SA-20-AR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SurgeX |
| Model | SA-20-AR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3260 MB |
