SurgeX SA-20-AR handleiding
Handleiding
Je bekijkt pagina 18 van 27
SA-20-AR User Manual
____________________________________________________________________________________________________________
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com 17
Network Commands
Command
Description
Admin
Fact Def
get network
Returns all network settings currently in use. Example:
Mode: DHCP
IP Address: 10.1.2.69
Subnet: 255.255.255.0
Gateway: 10.1.2.1
HTTP Port: 80
Telnet Port: 23
DxP Port: 9100
Timeout: 20
Ok
Yes
set ipmode < static | dhcp >
Sets the IP address mode. Static mode locks the IP address
as set; DHCP mode allows a DHCP server to assign the
address.
Yes
Static
set ipaddress < dotted decimal >
Sets the IP address.
Yes
192.168.1.254
set subnet < dotted decimal >
Sets the Subnet Mask.
Yes
255.255.255.0
set gateway < dotted decimal >
Sets the Gateway address.
Yes
192.168.1.1
set http port < 0-65535 >
Sets the port that the internal Web server listens for
incoming connections on. When set to 0 the web server is
disabled. May not be disabled when Telnet and DxP are
both disabled.
Yes
80
set telnet port < 0-65535 >
Sets the port that the internal Telnet server listens for
incoming connections on. When set to 0 the Telnet server
is disabled. May not be disabled when Web and DxP are
both disabled.
Yes
23
set dxp port < 0-65535 >
Sets the port that the internal DxP service listens for
incoming connections on. When set to 0 the DxP service
is disabled. May not be disabled when Web and Telnet are
both disabled.
Yes
9100
set timeout < 0-999 >
Sets the automatic network timeout in minutes.
Yes
2
Bekijk gratis de handleiding van SurgeX SA-20-AR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SurgeX |
| Model | SA-20-AR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3260 MB |
