Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 82 van 142
Note: This feature is NOT available when "Workload Profile" is set to Telco NFVI, Telco
NFVI-FP, or Telco FlexRAN.
C1 to C1e Promotion
If this feature is set to Enabled, CPU will run at its minimum frequency for lower power
consumption in the C1 state. The options are Disabled and Enabled. This feature is CPU-
dependent.
Note: This feature is available when "Workload Profile" is set to Disabled.
ACPI C6x Enumeration
Use this feature to configure C6 state or C6 P-state as ACPI C2 or ACPI C3 state. The options
are Disabled, C6S as ACPI C2, C6S as ACPI C3, C6S-P as ACPI C2, C6S-P as ACPI C3, and
Auto.
Note: This feature is available when "Workload Profile" is set to Disabled.
Package C State Control Menu
►Package C State Control
Note: This submenu is available when “Power Performance Tuning” is set to BIOS Controls
EPB.
Package C State
Use this feature to optimize and reduce CPU package power consumption in the idle mode.
Please note that the changes you've made in this setting will affect all CPU cores or the circuits
of the entire system. The options are C0/C1 state, C2 state, C6 (non Retention) state, No Limit,
and Auto.
Note: This feature is NOT available when "Workload Profile" is set to I/O, Telco NFVI, Telco
NFVI-FP, or Telco FlexRAN.
LTR IIO Input
Use this feature to set the MSR 1FCh Bit[29]. The options are Take IIO LTR input and Ignore
IIO LTR input.
82
X14SBT-GAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
