Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 45 van 142
General Guidelines for Optimizing Memory Performance
l
It is recommended to use DDR5 memory of the same type, size, and speed.
l
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the
slowest DIMM.
l
The motherboard will support an odd number amount of memory modules. However, to
achieve the best memory performance, a balanced memory population is
recommended.
DIMM Installation
Warning! Do not use excessive force when pressing the release tabs on the ends of
the DIMM socket to avoid causing any damage to the memory module or the DIMM
socket. Handle memory modules with care. Carefully follow all the instructions given in
"Static-Sensitive Devices" on page 25 to avoid ESD-related damages done to your
memory modules or components.
1. Insert the desired number of DIMMs into the memory slots based on the recommended
DIMM population table earlier in this section.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
Figure 2-37. Unlock the DIMM Slot
3. Align the key of the DIMM with the receptive point on the memory slot.
45
X14SBT-GAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
