Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 39 van 142
Preparing the Processor Socket for Installation
This motherboard comes with a plastic protective cover installed on the processor socket.
Remove it from the socket to install the Processor Heatsink Module (PHM). Gently pull up one
corner of the plastic protective cover to remove it.
1. Press the tabs inward.
Figure 2-27. Processor Socket with Plastic Protective Cover
2. Pull up the protective cover from the socket.
Note: Do not touch or bend the socket pins.
Figure 2-28. Plastic Protective Cover Removed
Installing the Processor Heatsink Module
1. Align pin 1 of the PHM with the printed triangle on the processor socket.
2. Make sure all four PEEK nuts of the heatsink (marked A, B, C, and D) are aligned with
the threaded fasteners (marked a, b, c, and d), then gently place the heatsink on top of
the processor socket.
39
X14SBT-GAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
