Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 26 van 142
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure that
the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly
recommended because they ground the motherboard to the chassis. Make sure that the metal
standoffs click in or are screwed in tightly.
Tools Needed
Figure 2-1. Torque Driver (1), Phillips Screws (6), Standoffs (6, only if needed)
Mounting Holes for Built-in Thumbscrews
These mounting holes are used for built-in thumbscrews that will help securely attach the
motherboard to the chassis.
Figure 2-2. Mounting Hole for Thumbscrews
Notes:
l
To avoid damaging the motherboard and its components, do not use a force greater
than 8 lbf-in on each mounting screw during motherboard installation.
l
Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
For a detailed diagram of the X14SBT- GAP motherboard, see the layout under "Quick
Reference" on page 12.
26
X14SBT-GAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
