Supermicro X14DBG-MAP handleiding
Handleiding
Je bekijkt pagina 72 van 167
For a detailed diagram of the X14DBG- MAP motherboard, see the layout under "Quick
Reference" on page 12.
8-Pin Power Connector
One 8-pin +12 V power connector, located at JPWR1 on the X14DBG-MAP motherboard, is
used to provide power through cables coming from the power distributor (PDB).
For a detailed diagram of the X14DBG- MAP motherboard, see the layout under "Quick
Reference" on page 12.
8-pin CPU Power
Pin Definitions: Eight Total
Pin# Definition
1–4 GND
5–8 +12 V (12 V Power)
12-Pin Power Input Connector
Four 12-pin +12 V power input connectors, located at JPWR5–JPWR8 on the X14DBG-MAP
motherboard, are used to provide power from the power distribution board.
For a detailed diagram of the X14DBG- MAP motherboard, see the layout under "Quick
Reference" on page 12.
Headers and Connections
For information about the headers on the X14DBG-MAP motherboard, refer to the following
content.
BMC Module Connector
A BMC module connector is located at JBMC1 on the X14DBG-MAP motherboard.
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the X14DBG-MAP motherboard. Attach the
appropriate cable from the chassis to inform you when the chassis is opened.
For a detailed diagram of the X14DBG- MAP motherboard, see the layout under "Quick
Reference" on page 12.
72
X14DBG-MAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14DBG-MAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBG-MAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21954 MB |
