Supermicro X14DBG-MAP handleiding
Handleiding
Je bekijkt pagina 70 van 167
2.5 Battery Removal and Installation
Battery Removal
To remove the onboard battery, follow the steps below:
1. Power off your system and unplug your power cable.
2. Locate the onboard battery as shown below.
3. Using a tool such as a pen or a small screwdriver, push the battery lock outwards to
unlock it. Once unlocked, the battery will pop out from the holder.
4. Remove the battery.
Proper Battery Disposal
Important: Handle used batteries carefully. Do not damage the battery in any way; a
damaged battery may release hazardous materials into the environment. Do not discard a
used battery in the garbage or a public landfill. Comply with the regulations set up by your
local hazardous waste management agency to dispose of your used battery properly.
Battery Installation
To install an onboard battery, follow steps 1 and 2 above and continue below:
Important: When replacing a battery, be sure to only replace it with the same type.
1. Identify the battery's polarity. The positive (+) side should be facing up.
2. Insert the battery into the battery holder and push it down until you hear a click to ensure
that the battery is securely locked.
Figure 2-69. Installing a Battery
70
X14DBG-MAP: Component Installation
Bekijk gratis de handleiding van Supermicro X14DBG-MAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBG-MAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21954 MB |
