Supermicro SuperServer AS-3015MR-H10TNR Handleiding (94 Pagina's)

Handleiding

43

Chapter 4: Motherboard Connections

Port 80

A Port 80 header is located at JTPM1 to provide a Port 80 connection. Use this header to

enhance system performance and data security. Refer to the table below for pin denitions.

Go to the following link for more information on the TPM: http://www.supermicro.com/manuals/

other/TPM.pdf.

Port 80 Header

Pin Denitions

Pin# Denition Pin# Denition

1 +3.3 V 2 SPI_CS#

3 RESET# 4 SPI_MISO

5 SPI_CLK 6 GND

7 SPI_MOSI 8 Key

9 +3.3 V 10 SPI_IRQ#

Micro Low-Prole PCIe Slot

There is one Micro-LP PCIe 5.0 p43-x4 slot with two USB 2.0 connections at J9. This slot is used

for a Supermicro Micro-LP Network card.

PCIe 5.0 x16 Slot (supports up to 75 W)

There is one PCIe 5.0 x16 slot with 75 W power at J17. This slot is used for an Add-On Card

(AOC).

4.2 Headers and Connectors

SATA Connectors

One SATA connectors (CN1) provides two SATA port connections (SATA0 and SATA1) on

the H13SRE-F. A cable is needed to make the connection.

MicroCloud Backplane Connector

There is one MicroCloud Backplane connector located at J12.

Bekijk gratis de handleiding van Supermicro SuperServer AS-3015MR-H10TNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.