Supermicro SuperBlade SBI-420P-1T3N Handleiding (94 Pagina's)

Handleiding

SuperBlade Server SBI-420P-1(C2/T3)N User's Manual

30

Installing Memory

ESD Precautions

Electrostatic Discharge (ESD) can damage electronic com ponents including memory modules.

To avoid damaging DIMM modules, it is important to handle them carefully. The following

measures are generally su󰀩cient.

• Use a grounded wrist strap designed to prevent static discharge.

• Handle the memory module by its edges only.

• Put the memory modules into the antistatic bags when not in use.

Installing Memory

Begin by removing power from the system as described in Section 3.1. Follow the memory

population sequence in the table above.

1. Push the release tabs outwards on both ends of the DIMM slot to unlock it.

Notches

Release Tabs

2. Align the key of the DIMM with the receptive notch on the memory slot and with your

thumbs on both ends of the module, press it straight down into the slot until the module

snaps into place.

3. Press the release tabs to the locked position to secure the DIMM module into the slot.

Caution: Exercise extreme caution when installing or removing memory modules to prevent

damage to the DIMMs or slots.

Removing Memory

To remove a DIMM, unlock the release tabs then pull the DIMM from the memory slot.

Key

Bekijk gratis de handleiding van Supermicro SuperBlade SBI-420P-1T3N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.