Supermicro SuperBlade SBI-420P-1T3N Handleiding (94 Pagina's)

Handleiding

SuperBlade Server SBI-420P-1(C2/T3)N User's Manual

20

Processor Carrier Assembly

The Processor Heatsink Module (PHM)

After creating the processor carrier assembly, mount the heatsink onto the carrier assembly

to form the processor heatsink module (PHM).

Note: If this is a new heatsink, the thermal grease has been pre-applied. Otherwise, apply

the proper amount of thermal grease to the underside of the heatsink.

1. Turn the heatsink over with the thermal grease facing up. Note the two triangle cutouts

(A, B) located at the diagonal corners of the heatsink as shown in the drawing below.

2. On the processor carrier assembly, nd pin 1, as noted by the triangles. Hold the

processor carrier assembly over so that the gold LGA is facing up.

3. Align clip "a" (pin 1) on the carrier assembly with the triangular cutout A on the heatsink

and b, c, d on the carrier assembly with B, C, D on the heatsink.

4. Push the carrier assembly onto the heatsink, making sure that all four clips on each

corner are properly secured.

Note: These diagrams show an air cooled heatsink.

Heatsink

b

d

a

c

Pin1

A

C

D

B

Bekijk gratis de handleiding van Supermicro SuperBlade SBI-420P-1T3N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.