Supermicro MicroBlade MBI-311C-1C2 Handleiding (98 Pagina's)

Handleiding

35

Chapter 3: Motherboard Connections

M.2 Slot

This motherboard has one M.2 slot (M.2-H). The M.2 slot supports PCIe 4.0 x4/SATA 3.0

(32Gb/s) SSD cards in the 2280 and 22110 form factors.

SATA Port

There is one SATA 3.0 port (I-SATA1) on the motherboard, which provides connections for

ve SATA 3.0 (RAID 0, 1, 5, 10), with four to 2.5" SATA BPN and one to 3.5" SATA BPN, one

SATA 3.0 with DOM power receptacle connector and one SATA 3.0 right angle receptacle

connector.

Supermicro SuperDOMs are backward compatible with regular SATA headers or SATA DOMs

that need external power cables. Set J3 to pins 1-2 to use the SATA port as onboard SATA

or pins 2-3 as AOC SAS.

Note: For more information on the SATA HostRAID conguration, refer to the Intel SATA

HostRAID user's guide posted at https://www.supermicro.com/support/manuals/.

Chassis Backplane Connector

Use J1 to connect to the system backplane. This connection provides Ethernet to the system

and CMM management.

CPLD JTAG Header

A Complex-Programmable-Logical-Device (CPLD) JTAG header is located at J6 on the

motherboard.

VGA/USB Module Connector

Use JKVM1 to connect to a VGA/USB module.

Internal USB 3.2 Type-A Connector

There is one internal USB 3.2 port (JUSB1) on the motherboard.

Intel RAID Key Header

The JREK1 header allows you to enable RAID functions for NVMe connections. Refer to the

table below for pin denitions.

Intel RAID Key

PinDenitions

Pins Denition

1 GND

2 PU 3.3 V Stdby

3 GND

4 PCH RAID KEY

Bekijk gratis de handleiding van Supermicro MicroBlade MBI-311C-1C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.