Supermicro H14DSG-OD handleiding
Handleiding
Je bekijkt pagina 49 van 113
5. Remove the screwdriver (or shorting device).
6. Replace the cover, reconnect the power cord(s), and power on the system.
JPG1
JPG1 enables or disables the VGA connector. The default setting is enabled.
JPG1
Jumper Position Definition
Pins 1–2 Enabled
Pins 2–3 Disabled
JUID1
JUID1 is used for a chassis that supports a front UID button. Setting JUID1 to Pins 2-3
configures the front UID button as a reset button.
JUID1
Jumper Position Definition
Pins 1–2 Switch function UID
Pins 2–3 Reset
LED Indicators
For information about the LED indicators on the H14DSG- OD motherboard, refer to the
following content.
Onboard Power LED (LED1)
The Onboard Power LED is located at LED1 on the H14DSG-OD motherboard. When this LED
is on, the system is on. Be sure to turn off the system and unplug the power cord before
removing or installing components.
For a detailed diagram of the H14DSG- OD motherboard, see the layout under "Quick
Reference" on page 12.
Onboard Power LED Indicator
LED Color Definition
Off System Power Off (power cable not connected)
Green System Power On
49
H14DSG-OD: Component Installation
Bekijk gratis de handleiding van Supermicro H14DSG-OD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | H14DSG-OD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16495 MB |
