Supermicro Blade SBI-621E-1NE38 handleiding

Niet gecategoriseerd

Supermicro

61 pagina's

PDF beschikbaar

Handleiding

20 21

Chapter 2: Installation and Setup Chapter 2: Installation and Setup

Installation Overview

The processor (CPU) and processor carrier should be assembled together rst to form

the processor carrier assembly. This will be attached to the heatsink to form the processor

heatsink module (PHM) before being installed onto the CPU socket.

Notes:

• Use ESD protection.

• The sytem power cords must be removed from all power supplies.

• Check that the plastic protective cover is on the CPU socket and none of the socket pins

are bent. If they are, contact your retailer.

• When handling the processor, avoid touching or placing direct pressure on the LGA lands

(gold contacts). Improper installation or socket misalignment can cause serious damage

to the processor or socket, which may require manufacturer repairs.

• Refer to the Supermicro website for updates on processor support.

Installation Procedure Overview

After preparing the system, and following ESD precautions, there are four steps to installing

the processor and heatsink onto the motherboard.

1. Attach the processor to a plastic carrier to create the processor carrier assembly.

2. Attach the processor carrier assembly to the heatsink to create the processor heatsink

module (PHM).

3. Remove the socket cover.

4. Install the PHM.

2.3 Processor and Heatsink

Processor Overview

The motherboard supports four versions of the 4th or 5th Gen Intel Xeon Scalable processors.

They di󰀨er as described below, and each requires a di󰀨erent CPU carrier. The CPU carriers

di󰀨er by the presence or absence of shims and levers.

CPU and Carrier Type

CPU Type Cores Carrier Type Lever Shim Carrier Part Number

XCC

60/64 E1A Yes No

SKT-1333L-0000-FXC

(alt: SKT-1333L-0001-LTS)

MCC

32 E1B Yes Yes

SKT-1424L-001B-FXC

(alt: SKT-1424L-001B-LTS)

LCC

12 E1B Yes Yes

SKT-1424L-001B-FXC

(alt: SKT-1424L-001B-LTS)

Max (HBM)

56 E1C No No

SKT-1425H-001C-FXC

(alt: SKT-1425H-001C-LTS)

SP XCC SP MCC/LCC

Max Series

Bekijk gratis de handleiding van Supermicro Blade SBI-621E-1NE38, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.