Supermicro A2SAN-L handleiding
Handleiding
Je bekijkt pagina 42 van 103
42
A2SAN-H/-E/-L and X11SAN User's Manual
M.2 Slot
M.2 is formerly known as Next Generation Form Factor (NGFF) and is located at JMD1 on
the bottom side of the motherboard. The M.2 slot is designed for internal mounting devices.
The A2SAN-H/-E/-L and X11SAN motherboard deploys a B-KEY for SATA/PCIe SSD devices
or USB/PCIe WWAN or GNSS card. The A2SAN-H/-E/-L and X11SAN deploys a 2280 screw
hole location for a 2280 M.2 module. 2242 and 3042 M.2 modules are supported by an
extender bracket to t on the 2280 screw hole location.
JMD1
JPW1
JMP1
JLPC80
JSMBUS1
J5
JPT1
1
2
1. M.2 Slot
2. SMBus Header
System Management Bus Header
A System Management Bus header for additional slave devices or sensors is located at
JSMBUS1 on the bottom side of the motherboard. See the table below for pin denitions.
SMBus Header
Pin Denitions
Pin# Denition
1 SMB_DATA
2 GND
3 SMB_CLK
4 NC
Bekijk gratis de handleiding van Supermicro A2SAN-L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | A2SAN-L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13897 MB |
Caratteristiche Prodotto
| Breedte | 146 mm |
| Diepte | 101.6 mm |
| Aantal processorkernen | 2 |
| Type stroombron | ATX |
| Aantal USB 2.0-poorten | 4 |
