Sungrow SG6.0RS-L handleiding
Handleiding
Je bekijkt pagina 34 van 98
24
• The installation site must have solid ground, free of rubber-like soils (which cannot be ef-
fectively compacted) or weak soils, and should not be prone to subsidence. Also, avoid
low-lying areas where water or snow may easily accumulate. Ensure the site is located
above the highest recorded water level in the area.
• Do not install the inverter in a position that could be flooded.
• To prevent vegetation or water on the ground from impacting inverter operation, if the
space above meets the designated requirements, elevate the inverter to an appropriate
height.
• Install the inverter in a place with shelter, so as to prevent it from getting impacted by di-
rect sunlight and severe weather (e.g. snow, rain, and lightning). The inverter will derate
in high temperatures for self-protection. If installed in a place directly exposed to sunlight,
as the temperature rises, the inverter may witness power reduction.
• Good heat dissipation is very important to the inverter. Please install the inverter in a
ventilated environment.
• If the inverter needs to be installed in a closed or semi-closed environment, please install
additional heat dissipation or ventilation devices. Furthermore, while the inverter is oper-
ating, ensure the indoor ambient temperature does not exceed the outdoor ambient tem-
perature. A semi-closed environment refers to a special space where natural ventilation
is limited and gas or heat may easily accumulate, although it is not fully enclosed on all
six sides.
• Please consult SUNGROW before installing inverters outdoors in areas prone to salt
damage, which mainly are coastal areas within 500 meters of the coast. The sedimenta-
tion amount of salt spray is correlated to the characteristics of the seawater, sea winds,
precipitation, air humidity, topography, and forest coverage in the adjacent sea areas,
and there are substantial differences between different coastal areas.
• Do not install the inverter in an environment contaminated with chemicals such as halo-
gen and sulfide.
• Do not install the inverter in an environment with vibration and strong electromagnetic
field. Strong-magnetic-field environments refer to places where magnetic field strength
measures over 30 A/m.
• In dusty environments such as places full of dust, smoke, or floc, particles may cling to
the device’s air outlet or heat sink, thus impacting its heat dissipation performance or
even getting it damaged. Therefore, do not install the inverter in dusty environments. If
the inverter has to be installed in such environments, please clean its fans and heat sink
on a regular basis to ensure a good heat dissipation performance.
• To avoid disturbing residents in living areas with noise generated during the operation of
the device, do not install the inverter in noise-sensitive areas such as bedrooms. It is
preferable to choose an open location that is far away from the living and resting areas.
• The average temperature approximately 1 m around the inverter should be taken as its
ambient operating temperature. The temperature and humidity should meet the require-
ments below:
4 Mechanical Mounting User Manual
Bekijk gratis de handleiding van Sungrow SG6.0RS-L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG6.0RS-L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9136 MB |
