Sungrow SG250HX-20 handleiding
Handleiding
Je bekijkt pagina 32 van 154
User Manual 4 Mechanical Mounting
- If the inverter is installed in a sandy and windy environment, please add safeguards
against sand and dust on the air inlet and outlet of the air duct, so as to avoid impacts
on fan operation caused by air duct blockage. Please remove the safeguards before
putting the inverter into operation.
4.2.2 Carrier Requirements
The mounting structure where the inverter is installed must comply with local/national stan
dards and guidelines. Ensure that the installation surface is solid enough to bear four times
the weight of the inverter and is suitable for the dimensions of the inverter (e.g. cement walls,
plasterboard walls, etc.).
Do not install the inverter on a carrier that may vibrate in resonance, so as to avoid making
bigger noise.
The structure should meet the following requirements:
4.2.3 Angle Requirements
Install the inverter vertically or tilt backwards. Do not install the inverter horizontally, forward,
excessively backward, sideways, or upside down.
23
Bekijk gratis de handleiding van Sungrow SG250HX-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sungrow |
| Model | SG250HX-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15373 MB |
