Structural Concepts Reveal NR3647DSV handleiding

Niet gecategoriseerd

Structural Concepts

24 pagina's

PDF beschikbaar

Handleiding

INSTALLATION: TOE-KICK & REAR PANEL REMOVAL / REMOVING CASE FROM PALLET

Front Toe-Kick

Pallet Rubber

Shipping Block

Shipping

Bracket

1. Remove Front Toe-Kick From Case

• To prevent damage to case, remove front

toe-kick from case before removing from pallet.

• Place front toe-kick in secure location while

removing case from pallet.

2. Remove Rear Panels From Case

• To prevent damage to case,

if upper panel and toe-kick is

on the case, lift them UP

and OFF.

• Upper and lower rear panels

are held in place by magnets.

• No screw removal is required.

• Place panels in

secure location while

removing case from

pallet.

3. Removing Case From Pallet

• Use Phillips driver to remove screws from

shipping brackets. Remove and discard

shipping brackets from pallet.

• Place J-bar/pry bar under base frame.

Raise case up from pallet to take weight

off casters.

• With case raised, lower casters all the

way down against pallet (see next step

for detailed instructions on lowering or

raising casters).

• Remove rubber shipping blocks.

Upper Rear

Panel

Lower Rear Panel

Bekijk gratis de handleiding van Structural Concepts Reveal NR3647DSV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.