Structural Concepts Oasis CN43R handleiding

Niet gecategoriseerd

Structural Concepts

27 pagina's

PDF beschikbaar

Handleiding

SHIMMING FRAME SUPPORT RAILS / ADJUSTING LEVELERS

1. Cases With Levelers: Adjust

• Important! For cases with casters, after case is in

proper position, levelers must then be

LOWERED to floor.

• Adjust case so it is level and plumb.

• You may need to remove front and/or rear

toe-kick to access levelers.

• Use adjustable wrench (and possibly a pry bar) to

adjust leveler.

• Do not use pry bar on toe-kick (it may buckle).

• Do not use pry bar on end panel (it may chip).

• Use pry bar ONLY on base frame to avoid

damaging case.

• Use a block to reach base frames with pry bar.

• See below illustrations.

2. Sealing Cases

• If the case is installed and intended to be sta-

tionary, a generous bead of food grade silicone

sealant along the bottom of the front toe-kick

and rear panel is needed.

• When properly applied, this food grade silicone

sealant will prevent water from seeping to the

floor as well as crumbs and other residue from

entering beneath the case.

Pry Bar

Base Frame

Leveler

Adjustable

Wrench

Bekijk gratis de handleiding van Structural Concepts Oasis CN43R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.