Structural Concepts HMO3953R handleiding
Handleiding
Je bekijkt pagina 14 van 43
14
POSITIONING & ALIGNING CASE / ADJUSTING LEVELERS / FRAME SUPPORT RAILS
Pry Bar
Base
Frame
Leveler
Adjustable
Wrench
1. Position & Align Case Alongside Other
Cases
Before adjusting levelers, make certain that the
case is in proper position and, if required,
aligned with adjoining case.
This may require the repositioning of the case
you are installing or
the already positioned case.
2. Adjust Levelers
See illustrations and photos at right.
Note: Depending upon options and features
chosen, illustrations may not exactly reflect your
particular case’s features.
After case is in proper position, adjust case so it
is level and plumb (see illustrations at right).
You may need to remove front and/or rear
Toe-Kick to access levelers.
Use adjustable wrench to adjust leveler.
Depending upon case weight, it may be
necessary to use a Pry Bar to raise the case.
Do not use Pry Bar on Toe-Kick as it may
buckle.
Do not use Pry Bar on End Panel; it may chip.
Use Pry Bar ONLY on Base Frame to avoid
damaging case.
3. Frame Support Rails Must Be Shimmed
Illustration below shows frame support rails.
Shims will be provided with all cases that have
frame support rails.
Use shims to level case.
Note: After case is in position, it must be
sealed to floor to prevent entry or leakage of
liquid or moisture.
Base
Frame
Leveler
Toe-Kick
Block
Frame Support Rails
Bekijk gratis de handleiding van Structural Concepts HMO3953R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Structural Concepts |
| Model | HMO3953R |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 14152 MB |
