Structural Concepts Grocerant FB6SS-4R handleiding

Niet gecategoriseerd

Structural Concepts

27 pagina's

PDF beschikbaar

Handleiding

PRECAUTIONS

• Following are important precautions to prevent damage

to unit or merchandise. Read carefully!

• See previous page for specifics on OVERVIEW,

CONDITION TYPE, COMPLIANCE and WARNINGS.

WIRING DIAGRAM

• Each case has its own wiring diagram folded and in its

own packet. It may be placed near ballast box, field

wiring box, raceway cover, or other related location.

REFRIGERANT DISCLOSURE STATEMENT

• This equipment is prohibited from use in California with

any refrigerants on the “List of Prohibited Substances” for

that specific end-use, in accordance with California Code

of Regulations, title 17, section 95374.

• This disclosure statement has been reviewed and

approved by Structural Concepts and Structural Concepts

attests, under penalty of perjury, that these statements

are true and accurate.

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / CORDS / WIRING - PAGE 2 of 2

CAUTION! POWER CORD AND PLUG MAINTENANCE

Risk of electric shock. If cord or plug becomes damaged,

replace only with cord and plug of same type.

CAUTION! GFCI BREAKER REQUIREMENT

If N.E.C. (National Electric Code) or your local code

requires GFCI (Ground Fault Circuit Interrupter) protection,

you MUST use a GFCI breaker in lieu of a GFCI receptacle.

CAUTION! ADVERSE CONDITIONS / SPACING ISSUES

• Performance issues caused by adverse conditions are NOT warranted.

• Case must not be exposed to direct sunlight or any heat source.

• To maintain proper case temperature, keep case at least 15-feet from exterior

doors, overhead HVAC vents or any air curtain disruption.

CAUTION

CAUTION! DO NOT RELY ON THERMOMETERS OR

THERMOSTATS FOR PRODUCT (FOOD) TEMPERATURES.

• Thermometers & thermostats reflect air temperatures ONLY.

• For ACTUAL product (food) temperatures, use a calibrated food

probe thermometers ONLY.

• For accurate readings, DO NOT use infrared food thermometers.

WIRING DIAGRAM FORMAT & LOCATION

• Each case has its own wiring diagram folded and in its own packet.

• Wiring diagram placement may vary; it may be placed near ballast

box, field wiring box, raceway cover, or other related location.

• See sample wiring diagram at left (for illustrative purposes only).

CAUTION!

To prevent sagging, do not exceed 5 LBS (2.3 KG) weight load

per top glass section (between posts and/or supports).

LBS

Bekijk gratis de handleiding van Structural Concepts Grocerant FB6SS-4R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.