Structural Concepts Fusion GMS8H handleiding

Niet gecategoriseerd

Structural Concepts

19 pagina's

PDF beschikbaar

Handleiding

INSTALLATION INSTRUCTIONS: SKID REMOVAL / CASE ALIGNMENT, ADJUSTING & SEALING

Installation

Note: Units shown may not depict an exact representation of your particular unit being installed.

1. Remove Unit From Skid

Caution: case must always remain supported or

center of gravity will allow case to fall. Slide unit to

rear of skid and tip backward off skid.

Support

required

to prevent

tipping.

Slide

Skid Out

2. Case Aligning, Adjusting and Sealing

For service glass to align properly, case must be

level and plumb.

• Shims will be provided with all cases that have

frame support rails.

• Note: After case is in position, it must be

sealed to floor to prevent entry or leakage of

liquid or moisture.

• Caution! These units MUST BE sealed to the

floor to maintain conformance to equipment

mounting standards.

• Align multiple units.

• See next page for information on sealing and

bolting heated cases together.

Frame

Support

Rails

Caution! Do Not

Grasp Fold-Down

Ledge To

Remove From

Skid Or move

Into Position.

Bekijk gratis de handleiding van Structural Concepts Fusion GMS8H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.