Structural Concepts Fusion GMGV4 handleiding
Handleiding
Je bekijkt pagina 33 van 43
33
CLEANING SCHEDULE (INTERIOR) - TO BE PERFORMED BY STORE PERSONNEL (PAGE 1 of 3)
FREQ. INSTRUCTIONS
Daily Seafood Case: Ice Pans. Meat Case: Wire Racks: Remove from case. Submerse in hot
water while using an anti-bacterial soap solution. Rinse thoroughly, dry. Return to case.
For seafood case, new batch of ice required.
Daily Open Unit Area (With Hot Gas Loops Exposed): While pans/racks are being cleaned, wipe
down open area (including copper tubing, tub and drain area) with hot water solution and
anti-bacterial soap solution. Rinse thoroughly.
Daily Hybrid Case Shelving: Reach through rear openings to clean shelves with warm water, mild
detergent and soft cloth. Dry with paper towel or clean cloth when done.
Weekly Tub, Trough and Drain (Remote Units):
>> Keep clean and free of debris which could clog tub and drain. To access drain area,
remove ice pans (for seafood case) / wire racks (for meat cases).
>> Remote units have drain systems that flows DIRECTLY INTO floor drain.
>> To clean tub, trough and drain, follow these instructions:
• Case may remain ON while performing tub cleaning process!
• Use hose with warm or hot water, sponge and either a bucket with warm, soapy water or
spray bottle with anti-bacterial soap.
• Wipe down tub with hot water and anti-bacterial soap solution.
• If cleaning a hybrid case, wipe down evaporator coil unit. Caution! Do not splash water into
axial fans while cleaning!
• Dry with clean cloth or chamois when done.
• Return pans and dividers to case.
Weekly Tub, Trough and Drain (Self-Contained Units):
>> Keep clean and free of debris which could clog tub and drain. To access drain area, remove
ice pans for seafood case) / wire racks (for meat cases).
>> Self-Contained units have drain systems that flows DIRECTLY INTO evap. pan.
• DO NOT use a hose (with flowing water) to clean tub area.
• This may cause water to flow through drain, into evaporator pan, and possibly overflow,
damaging flooring.
• Structural Concepts is not liable for such damages!. See TROUBLESHOOTING -
GENERAL ISSUES section in this manual should an overflow occur.
• At case rear is a drain ‘ball valve’ handle that may be rotated (see label on case rear for
direction) to allow water to flow through drain spout (below handle).
• See INSTALLATION: SELF-CONTAINED MODEL GMG6 MEAT CASE REAR DRAIN/
TEMP. CONTROLLER section in this manual for the location of the ‘ball valve’ handle and
drain spout.
• If cleaning a hybrid case, wipe down evaporator coil unit. Caution! Do not splash water into
axial fans while cleaning!
• Caution! Make certain you have a bucket or hose connected to drain (routed to floor drain)
prior to re-routing water flow!
• Remove pans and dividers from case. While pans and dividers are being cleaned, use
sponge and anti-bacterial soap solution in bucket or spray bottle to wipe down tub, trough
and drain with sponge or clean cloth.
• Dry with clean cloth or chamois when done.
• Return pans and dividers to case.
Bekijk gratis de handleiding van Structural Concepts Fusion GMGV4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Structural Concepts |
| Model | Fusion GMGV4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17753 MB |
