Structural Concepts Fusion GMG8 handleiding

Niet gecategoriseerd

Structural Concepts

43 pagina's

PDF beschikbaar

Handleiding

CLEANING SCHEDULE (EXTERIOR) - TO BE PERFORMED BY STORE PERSONNEL

AREA FREQ. INSTRUCTIONS

Exterior Daily All Glass / Mirrors: Clean side glass, front glass and mirrors (if any) with

household or commercial glass cleaner.

Daily Rear Sliding Door Exterior Glass:

• Clean rear sliding doors with household or commercial glass cleaner.

• Doors can be completely removed from case for more thorough cleaning.

See MAINTENANCE FUNDAMENTALS: REAR SLIDING DOORS /

STANDARD LIGHT FIXTURES section in this manual for specifics.

• Wipe out door tracks with mild soap solution and sponge or clean cloth.

• Dry thoroughly.

Daily End Panels, Front Panel / Rear Panel, Toe-Kicks, Rear Ledge Cutting Board,

etc.: Wipe off all surfaces with warm water and mild soap solution and

non-abrasive cloth. Dry thoroughly.

Daily Stainless Steel Surfaces:

• Wash with a solution of hand dishwashing liquid detergent and water; or a

solution of baking soda and water. Rinse and polish dry with paper towel or soft

cloth.

• Never use scouring powders or steel wool as they will scratch stainless steel.

• Brighten by polishing with a cloth dipped in vinegar or in ammonia; sprinkle

baking soda on sponge and rub gently; rinse. Polish dry with paper towel.

• Remove streaks or heat stains from stainless steel by rubbing with club soda.

Weekly Wood, Laminate and Painted Surfaces (Including Rear Storage Area): Clean

with mild soap and water solution and a soft cloth .

Monthly Under Case Cleaning: Remove front toe-kick (or rear grille). Vacuum under case

to remove all dust and dirt. Replace front toe-kick (or rear grille) when complete.

Bekijk gratis de handleiding van Structural Concepts Fusion GMG8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.