Structural Concepts Fusion GCD856HHLB handleiding
Handleiding
Je bekijkt pagina 14 van 24

14
CASE OPERATION, CONT’D: CERAMIC METAL HALIDE LIGHT FIXTURES
6. Ceramic Metal Halide Light Fixtures
• Warning! Disconnect power before providing
maintenance & service to unit.
• Warning! Lamps are NOT manufactured to
resist breakage. Replace with same wattage
ceramic metal halide lamps (similarly
manufactured). If uncertain of wattage, refer to
label near rear sliding doors for specifics.
• Warning! As ceramic heaters may also heat up
light fixture area, make certain that entire area
has been allowed to cool before touching light
fixtures.
• As ceramic metal halide lamps may take up to 15
minutes to gain full illumination, turn on lamps
BEFORE loading product into case. This will
allow proper time for proper illumination.
• Find overhead light switch location on START-UP /
LIGHTING / CASE TEMP. / PRODUCT
HEATING / SCC TEMPERATURE
CONTROLLERS section in manual.
• Light switch turns on lamps to entire overhead
section of case.
• To access light fixtures, remove fasteners.
• Then, slide overhead lamp housing toward case
center (allowing screw to housing slot) and lower
housing down from case.
• Replace light fixtures as necessary.
Thumb Screw For
Lamp Access (Typical)
Ceramic Metal Halide
Lamps (Typical)
Thumb Screw For
Lamp Access (Typical)
Note: Illustration shown may
not reflect every feature or
option of your particular case.
Bekijk gratis de handleiding van Structural Concepts Fusion GCD856HHLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Structural Concepts |
Model | Fusion GCD856HHLB |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 9204 MB |