Structural Concepts Fusion GCD656HHLB handleiding

Niet gecategoriseerd

Structural Concepts

24 pagina's

PDF beschikbaar

Handleiding

CASE ISSUES TROUBLESHOOTING METHOD

Product temperature

deviates outside of

acceptable range.

Product either

overheating or too

cool.

• If a large amount of product was added to the case, it will take time for the

temperature to adjust. Product should be pre-heated before placing into

display case.

• Probe thermometer may be faulty. Use a stainless steel stem-type

thermometer with dial of at least a 1-inch internal diameter and test product.

Accuracy to within 1.8 °F / 1 °C is acceptable.

• Authorized Personnel Only: Adjust temperature control settings:

See CASE OPERATION... section in this manual for instructions.

System is not

operating at all

Check that unit is properly plugged in.

Confirm that the MAIN power “throw switch” is on.

If power cord is used, confirm that it is plugged into outlet.

Authorized Personnel Only:

• Confirm that the utility power is on.

• Check that case is properly hard wired.

Authorized Personnel Only:

Check the circuit breaker box for tripped circuits.

Authorized Personnel Only:

• GFCI may be required.

• If N.E.C. (National Electric Code) or your local code requires GFCI (Ground

Fault Circuit Interrupter) protection, you MUST use a GFCI breaker in lieu of

a GFCI receptacle.

Product is not heating

at all

Heating elements may be malfunctioning.

• Call Structural Concepts Technical Service (listed on last page of manual).

• Move product out of case until unit is repaired.

Ceramic metal halide

lights are not working

Caution! Case is extremely hot hot! Turn off main power switch and allow

case to cool for 45 minutes before touching light bulbs.

• Be sure ALL lights are screwed in properly.

• Check that bulbs are not burned out.

• Replace bulbs if they are burned out.

TROUBLESHOOTING - GENERAL ISSUES (PAGE 1 of 2)

Bekijk gratis de handleiding van Structural Concepts Fusion GCD656HHLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.