Structural Concepts Fusion GCD656HHLB handleiding

Niet gecategoriseerd

Structural Concepts

24 pagina's

PDF beschikbaar

Handleiding

CLEANING SCHEDULE - TO BE PERFORMED BY STORE PERSONNEL - PAGE 2 OF 2

AREA FREQ. INSTRUCTIONS

Exterior Daily Glass Surfaces: Clean all glass surfaces with household or commercial glass

cleaner. Clean out door track with moist cloth.

Daily Rear Sliding Door Exterior Glass (Upper and Lowe Exterior Glass: Clean with

household or commercial glass cleaner.

Daily End Panels, Front Panel, Toe-Kick, Rear Ledge Cutting Board, etc.: Wipe off

all surfaces with warm water and mild soap solution and non-abrasive cloth. Dry

thoroughly.

Daily Stainless Steel Surfaces:

• Wash with a solution of hand dishwashing liquid detergent and water; or a

solution of baking soda and water. Rinse and polish dry with paper towel or soft

cloth.

• Never use scouring powders or steel wool as they will scratch stainless steel.

• Brighten by polishing with a cloth dipped in vinegar or in ammonia; sprinkle baking

soda on sponge and rub gently; rinse. Polish dry with paper towel.

• Remove streaks or heat stains from stainless steel by rubbing with club soda.

Weekly Rear Sliding Doors (Upper and Lower): Remove from case and place in location

away from foot traffic; clean doors and door tracks with a household or commercial

cleaner. Return doors to case.

Weekly Wood, Laminate and Painted Surfaces (Including Rear Storage Area): Clean

with mild soap and water solution and a soft cloth .

Monthly Under Case Cleaning: Remove front or rear toe-kick. Vacuum under case to

remove all dust and dirt. Replace front toe-kick(s) when complete.

Caution! Front Glass must be raised and lowered very carefully. When closing, weight of

glass can pinch fingers between Front Glass and Case. Raise front curved glass.

Clean inside cavity at both ends of the hinged top cap with a mild soap and water solution.

Bekijk gratis de handleiding van Structural Concepts Fusion GCD656HHLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.