Structural Concepts Elevate BD3632IS handleiding

Niet gecategoriseerd

Structural Concepts

28 pagina's

PDF beschikbaar

Handleiding

CONDITION TROUBLESHOOTING

Weight Sensors On

Shelf/Shelves Are

Malfunctioning

Contact Instant Retail Systems (see last page of User Manual).

Color-Coded Lights

On Shelf/Shelves

Are Malfunctioning

Contact Instant Retail Systems (see last page of User Manual).

Screen/Monitor Is

Malfunctioning

Contact Instant Retail Systems (see last page of User Manual).

Payment Processor

Is Malfunctioning

Contact Instant Retail Systems (see last page of User Manual).

Case Is Not Holding

Temperature

You must load case with pre-chilled product. A warm load can result in air

temperature of food storage compartment exceeding 45 °F (7 °C) for more than

15 minutes; this can result in vending mechanism disablement.

Temperature changes during defrost mode but will return to normal.

Check that case is not directly in the sun.

Check that condenser coil has been cleaned.

Check air return opening for obstructions.

If sight glass is part of condensing unit, check if it is flashing or showing low

charge.

Check set point temperature; it may be adjusted too high.

Condensing Unit Is

Not Operating

Check that the power is turned on.

Check if programmable controller settings are properly set. See your case’s serial

label for your model’s specified settings. See SERIAL LABEL LOCATION &

INFORMATION LISTED / TECH INFO & SERVICE section in manual for label

location, etc.

TROUBLESHOOTING (TO BE PERFORMED BY TRAINED SERVICE PROVIDER ONLY) - PAGE 3 of 4

Bekijk gratis de handleiding van Structural Concepts Elevate BD3632IS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.