Stihl SEA 20.0 handleiding
Handleiding
Je bekijkt pagina 32 van 240
► Clean the charger’s electrical contacts with a
paintbrush or a soft brush.
16 Repairing
16.1 Repairing Hand Vacuum, Bat‐
tery and Charger
The hand vacuum, the battery and the charger
cannot be repaired by the user.
► If the hand vacuum is damaged: Do not use
the hand vacuum and contact your STIHL
dealer for assistance.
► If the battery has a malfunction or is damaged:
Replace the battery.
► If the charger has a malfunction or is dam‐
aged: Replace the charger.
► If the connecting cable has a malfunction or is
damaged: Do not use the charger and have
the connecting cable replaced by a STIHL
dealer.
17 Troubleshooting
17.1 Troubleshooting the Hand Vacuum or Battery
Fault LEDs on the
hand vacuum
Cause Remedy
Hand vacuum
does not start
when switched
on.
1 LED flashing
green.
State of charge of the
battery is too low.
► Charge the battery.
1 LED emits red
light.
The battery is too
warm or too cold.
► Remove the battery.
► Allow the battery to cool down or warm
up.
3 LEDs flash
red.
There is a fault in the
hand vacuum.
► Remove the battery and reinsert it.
► Switch on the hand vacuum.
► If 3 LEDs continue to flash red: Do not
use the hand vacuum and contact your
STIHL dealer for assistance.
3 LEDs light up
red.
The hand vacuum is
too warm.
► Remove the battery.
► Wait for the hand vacuum to cool down.
4 LEDs
flash red.
There is a fault in the
battery.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Switch on the hand vacuum.
► If 4 LEDs continue to flash red: Do not
use the battery; contact a STIHL authori‐
zed dealer.
No electrical contact
between hand
vacuum and battery.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
The hand vacuum or
battery is damp.
► Allow the hand vacuum or battery to dry,
18.6.
The hand
vacuum cuts
out during ope‐
ration.
3 LEDs light up
red.
The hand vacuum is
too warm.
► Remove the battery.
► Wait for the hand vacuum to cool down.
There is an electrical
fault.
► Remove battery and reinsert it.
► Switch on the hand vacuum.
The suction
power of the
hand vacuum
decreases.
1 LED flashing
green.
State of charge of the
battery is too low.
► Charge the battery.
The container is full. ► Remove the battery.
► Empty the container.
English 16 Repairing
32 0458-006-9821-B
Bekijk gratis de handleiding van Stihl SEA 20.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stihl |
| Model | SEA 20.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27562 MB |
