Stiebel Eltron ISG web handleiding
Handleiding
Je bekijkt pagina 21 van 96
INSTALLATION
Commissioning
www.stiebel-eltron.com ISG web | 21
ENGLISH
Communication with the SERVICEWELT portal
LEDX2 indicates the connection status to the SERVICEWELT portal
(see chapter "Enabling data access from the SERVICEWELT portal").
When data access is not enabled, LEDX2 illuminates red.
Check the indication of LEDX2.
LED X2 Portal status
illuminated red no connection (connection is aborted after 3
attempts)
red rapid flashing Contact the service department.
red / green flashing Connection attempt
illuminated green connection established
green flashing Data transmission
Router settings
For automatic address assignment to the ISG, DHCP must be en-
abled on your router.
Check your router settings.
7.2 Registering on the home network
Note
If required, refresh the website by pressing the F5 key or
the web browser refresh button while registering with
SERVICEWELT.
7.2.1 Registration via router
Automatic IP address assignment
If DHCP is enabled on your home network router, the ISG obtains
its IP address automatically.
Call up the SERVICEWELT (see chapter "Accessing
SERVICEWELT").
If the Servicewelt does not open, the name resolution for "ser-
vicewelt" was unsuccessful.
Change your web browser settings. Enter "servicewelt" as a
proxy exception.
Disable Google search.
Carry out a manual registration.
Manual registration
Enter "http://servicewelt" or "192.168.0.126" in the address
bar of your web browser. Press Enter.
7.2.2 Registration without router
Use the crossover cable supplied to connect the ISG to a net-
work connection on your computer.
Enter "http://servicewelt" or "192.168.0.126" in the address
bar of your web browser. Press Enter.
If the Servicewelt does not open, you must manually assign your
computer an IP address in the ISG standard IP address range.
Example:
The ISG has the default IP address "192.168.0.126". Your computer
therefore obtains the IP address "192.168.0.100".
Open the control panel and navigate to the "LAN connection"
button (Windows7).
Click on "Properties".
Click on "Internet protocol version4".
Check "Use the following IP address".
In the field "IP address", enter "192.168.0.100".
In the field "Subnet mask" enter "255.255.255.0".
Click on "OK".
Enter "http://servicewelt" or "192.168.0.126" in the address
bar of your web browser. Press Enter.
Restart your computer if the Servicewelt does not open.
Note
If the Servicewelt still does not open after manual IP ad-
dress assignment and a restart, consult an IT contractor.
Note
Before disconnecting the ISG, reset the default network
settings on your computer.
7.3 Network configuration in the SERVICEWELT
D0000064136
Click on "Profile" in the menu bar to access the network
settings.
Bekijk gratis de handleiding van Stiebel Eltron ISG web, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stiebel Eltron |
| Model | ISG web |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22636 MB |
