Stiebel Eltron ISG web handleiding

96 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 20 van 96
INSTALLATION
Commissioning
20 | ISG web www.stiebel-eltron.com
26�04�14�000526�04�14�0006
Push the ISG to the right, until you feel it latch into the
retainer.
6.3 Power supply
26�04�14�0001
Note
The ISG connects to the interface for the second pro-
gramming unit or the remote control of your heat pump/
integral ventilation unit.
If there is only one interface, the ISG connects in parallel
to the CAN BUS as an additional programming unit.
Use the CAN BUS cable supplied to connect the ISG to your
heat pump/integral ventilation unit via the CAN interface.
When doing so, observe the operating and installation in-
structions of your heat pump/integral ventilation unit.
CAN BUS cable connection:
- White: High
- Brown: Low
- Black: Earth (Ground)
Use the crossover cable supplied to connect the ISG to your
router.
Note
Put the ISG into operation as the last bus subscriber.
Before you connect the ISG to the power supply,
make sure that the WPM has been commissioned
and has fully started up.
Connect the ISG to the mains using the power supply unit
supplied.
Note
The COM interface is for service purposes only.
7. Commissioning
7.1 Checks before commissioning
Wiring
Check the wiring between ISG, router, and heat pump/inte-
gral ventilation unit.
Power supply
When the power plug is plugged in, the ISG is switched on. The
power LED is illuminated. The ISG requires about 30seconds to
start up.
Check whether the power LED is illuminated.
Communication with the heat pump
LEDX1 indicates the connection status to your heat pump/integral
ventilation unit. LEDX1 should be constantly flashing rapidly.
Check the indication of LEDX1.
LED X1 CAN connection status
constant rapid flashing connection established
flashing connection is being established
no connection

Bekijk gratis de handleiding van Stiebel Eltron ISG web, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkStiebel Eltron
ModelISG web
CategorieNiet gecategoriseerd
TaalNederlands
Grootte22636 MB