Stiebel Eltron FCR 28/120 handleiding
Handleiding
Je bekijkt pagina 18 van 124
18 | FCR 28 www.stiebel-eltron.com
INSTALLATION
Settings
4. Settings
4.1 Temperature
Appliance type with temperature selector inside the control
panel
The temperature can be freely selected by a qualified contractor
(see chapter “Installation/ Settings”).
Factory setting: 60°C
4.2 Rapid heat-up in dual circuit operation
For appliance types with dual circuit operation, the qualified con-
tractor can install a button to control the rapid heat-up function
remotely. If required, you can switch this on. The rapid heat-up
function switches off when the selected temperature has been
reached and will not switch on again automatically.
5. Cleaning, care and maintenance
f Have the electrical safety of the appliance regularly checked
by a qualified contractor.
Scaling
f Almost every type of water will deposit limescale at high
temperatures. Limescale will settle inside the appliance and
affect its function and service life. The heating elements must
therefore be descaled from time to time. A qualified contrac-
tor who is aware of the local water quality will tell you when
the next service is due.
f Check the taps regularly. Limescale deposits at the tap out-
lets can be removed using commercially available descaling
agents.
f Regularly activate the safety valve to prevent it from becom-
ing blocked e.g. by limescale deposits.
6. Troubleshooting
Fault Cause Remedy
The water does not heat
up.
There is no power.
Check the fuses/ MCBs in
your fuse box/ distribu-
tion board.
The temperature is incor-
rectly adjusted.
Check the temperature
setting.
The flow rate is low.
The aerator in the taps or
shower heads is dirty or
scaled-up.
Clean or descale the aer-
ator or shower head.
Water drips from the
safety assembly after
heating has stopped.
The valve seat is contam-
inated.
Depressurise and isolate
the appliance from the
power supply. Contact a
qualified contractor.
If you cannot remedy the fault, notify a qualified contractor. To
facilitate and speed up your enquiry, please provide the serial
number from the type plate (no. 000000-0000-000000):
Nr.: 000000-0000-000000
Made in Germany
D0000117437
Bekijk gratis de handleiding van Stiebel Eltron FCR 28/120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stiebel Eltron |
| Model | FCR 28/120 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20189 MB |
