Stiebel Eltron CNS 1000 Plus LCD handleiding

Niet gecategoriseerd

Stiebel Eltron

60 pagina's

PDF beschikbaar

Handleiding

Cleaning (users)

22 | CNS Plus LCD www.stiebel-eltron.com

The following applies to all time programs (Pro1,

Pro2, Pro3):

If the end time is later than 23:59 h, the end time

will automatically be moved to the next day of the

week. The comfort phase is maintained past mid-

night and will end on the next day at the set end

time.

Time programs Pro1 and Pro2

With time programs Pro1 and Pro2, you can specify the comfort

mode start and end times. During the selected period, the appli-

ance heats to the set comfort temperature. Outside this specified

period, the appliance operates in setback mode. This results in a

comfort phase and a setback phase, which are repeated daily

(Pro1) or on every working day (Pro2).

Theses phases are factory-set as follows:

– 08:00h - 22:00h: Comfort mode

– 22:00h - 08:00h: Setback mode

When time programPro2 is enabled, the appliance

operates only in setback mode at weekends.

To configure comfort phases in time programs Pro1 and Pro2:

u In the configuration menu, call up the required time pro-

gram using "+" and "–".

u Press "OK".

ð The start time for comfort mode is displayed.

u Use "+" and "–" to set the required start time.

u Press "OK".

ð The end time for comfort mode is displayed.

u Use "+" and "–" to set the required end time.

u To save the setting, press "OK".

Time program Pro3

You can use time program Pro3 to specify up to 14 separate

comfort phases which are repeated weekly.

To configure a comfort phase in time program Pro3:

u In the configuration menu, call up the time program Pro3

using "+" and "–".

u Press "OK".

ð The display shows "3---".

u Press "OK".

ð A day of the week or a group of days is displayed.

u Use "+" and "–" to select the required day or group of days.

u Press "OK".

ð The start time for comfort mode is displayed.

u Use "+" and "–" to set the required start time.

u Press "OK".

ð The end time for comfort mode is displayed.

u Use "+" and "–" to set the required end time.

u Press "OK".

ð Comfort phase "3-01" has been configured.

u To configure a further comfort phase, use "+" and "–" in

time program Pro3 to select display "3---". Proceed as de-

scribe above.

Resetting the time programs

Activating parameter P4 resets all time programs

(Pro1, Pro2, Pro3) to the factory setting.

u To reset the selected comfort phases, activate parameterP4.

8.3.3 Parameter

Display Description Options

P1 Room temperature offset ±3 °C / ±5 °F

P2 Time format 12 h | 24 h

P3 Units for temperature indication °C| °F

P4 Reset Time programs on | off

P5 Reset relative heating time on | off

Changing a parameter value

u Call up the required parameter using "+" and "–".

u Press "OK".

ð The "Editable parameter" symbol appears.

u Select the required parameter value using "+" and "–".

u Press "OK" to save the selected value.

P1: Room temperature offset

Uneven temperature distribution in the room can result in a dif-

ferential between the displayed actual temperature I1 and the

room temperature you measure. To compensate for this differ-

ential, a room temperature offset of ±3°C can be set with para-

meter P1.

Example: The appliance shows I1 = 21.0°C. You have measured

a room temperature of 20.0°C. There is a differential of 1.0°C.

u To compensate for the differential, select an offset of P1 =

-1.0.

P2: Time format

Parameter P2 allows you to specify whether the time is dis-

played in the 12 hour or 24 hour format.

P3: Units for temperature indication

Parameter P3 is used to specify whether the room temperature

is displayed in degrees Celsius [°C] or Fahrenheit [°F].

P4: Reset time programs

Activating parameter P4 resets all Time programs to the factory

setting.

P5: Reset relative heating time

Activating parameter P5 resets the counter for relative heating

time (I2).

9 Cleaning (users)

NOTICE

Property damage

If moisture enters the appliance, the electronic com-

ponents may be damaged.

u Never spray cleaning spray into the air slot.

u Ensure that no moisture can enter the appliance.

u If a pale brownish discolouration appears on the appliance

casing, wipe it off with a damp cloth.

Bekijk gratis de handleiding van Stiebel Eltron CNS 1000 Plus LCD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.