Stelton Brus handleiding
Handleiding
Je bekijkt pagina 4 van 32
4
EN – Brus carbonator, wall mount
Installation of CO
2
cartridge
1. Remove the seal and protective plug from the CO
2
cartridge.
2. Carefully grasp the carbonator by the CO
2
cartridge compartment
and press and hold the release button to detach the carbonator
from the wall mount.
3. Turn the carbonator upside down to expose the bottom and
twist o the bottom cap from the CO
2
cartridge compartment.
4. Insert the CO
2
cartridge carefully through the hole at the bottom.
Avoid dropping the cartridge to prevent internal damage.
5. Aer inserting the cartridge, twist it clockwise gently to secure
it. Avoid using excessive force to fasten the cartridge.
6. Reattach the bottom cap to the CO
2
cartridge compartment
and place the carbonator back into the wall mount.
It is now ready for use.
CO
2
cartridge replacement
1. Carefully grasp the carbonator by the CO
2
cartridge compartment
and press and hold the release button to detach it from the
wall mount.
2. Turn the carbonator upside down to expose the bottom and
twist o the bottom cap from the CO
2
cartridge compartment.
3. Rotate the CO
2
cartridge counterclockwise to release it.
4. Aer releasing, remove the empty CO
2
cartridge, then follow the
"Installation of CO
2
cartridge" instructions to insert a new cartridge.
IMPORTANT: A CO
2
cartridge is not included in
the gibox. These can be purchased in leading
supermarkets and department stores.
425 g
Ø 60 mm
CO
2
Bekijk gratis de handleiding van Stelton Brus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stelton |
| Model | Brus |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4921 MB |