Steiner Predator 8 handleiding

Handleiding

12345678910111213141516171819202122232425/ 25

Afdrukken

Je bekijkt pagina 8 van 25

FUNCTION OF THE TURRET,

THE FAST RETICLE ADJUSTMENT:

There are 4 adjustable rings for 100 y

or 0, then 200 y, 300 y and 400 y. This

allows the ballistic curve of the ammu

-

nition to be ideally adjusted up to 400 y.

The data of the ammunition with the

bullet drop can be found in the ammu

-

nition package. Otherwise, a ballistics

calculator should be used to determine

the bullet drop.

The Turret has a zero stop.

THE SETTING OF THE RINGS:

1. Unscrew the cap by completely re-

moving the 2 Allen screws.

2. Pull off the transparent cover.

3. Now the individual rings can be re-

moved.

4. Replace the rings in a new arrange-

ment: Ring 1 at 0, then ring 2 at the

determined bullet drop of 200 y,

e.g., 8 cm (8 clicks further); then

the 300 y ring, e.g. at 16 clicks; then

400 y.

5. The rings can also be finely adjusted

using a pointed object, small screw-

driver or pencil in the small recess

of the ring.

6. The vernier on the 1st ring.

7. Then put the transparent cover

back on.

8. Fit the cap and then screw in both

Allen screws and tighten at about

0.5 Nm.

9. Check the shot at 100 y to see if the

0 position still fits.

10. The fast reticle adjustment is now

functional and can be used.

PREDATOR 8 BALLISTIC TURRET

1

2

3

7

8

4–6

STEINER ZEROMODE

To be able to provide the perfect riflescope even for challeng-

ing conditions, we have integrated Steiner ZeroMode technol-

ogy into our Predator 8 riflescope for long-distance shots. The

shooter can now use the elevation adjustment for further shots

and adjust the ballistic curve perfectly (determined according to

the ballistic data from the ammunition). After adjustment, the

vertical adjustment turret can always be reliably turned back to

its initial position. This is limited by a stop and so it cannot be

overtightened.

ILLUMINATION CONTROL

The Predator 8 riflescopes have a finely adjustable illuminated

red dot. From the starting point (see illustration) 6 night settings

are available, direction of rotation: clockwise. For use during

the day, you can choose between 5 settings with an extremely

bright illuminated dot, direction of rotation: anticlockwise. The

end position “Off”, as well as the intermediate positions “Day”

and “Night”, are unpowered. Reticle illumination is powered by a

3 volt CR 2032 battery. It is located in the illumination knob and

is accessible by unscrewing the

cover. To insert a new battery,

unscrew the battery compart-

ment on the left side. Press the

battery on one side to lift it up

and remove it. Insert a new bat-

tery with the flat side (+) facing

up. If you will not be using the

riflescope for an extended pe-

riod of time, it is recommended

you remove the battery.

PARALLAX ADJUSTMENT

All scopes are adjusted parallax-free to 100 y. The Predator 8

2-16x42, 3-24x50 and 4-32x56 riflescopes have a parallax com-

pensation from 20 y to infinity.

Parallax describes the visible

movement of the crosshairs

in relation to the target when

the eye is not looking directly

along the central axis of the ri-

flescope. Parallax is only neces-

sary for telescopic sights with

higher magnification. To com-

pensate for parallax, set the

Please make yourself aware of the local regulations for the

disposal of electronic products. Never throw batteries into

the household waste.

Remark

14 15

12345678910111213141516171819202122232425/ 25

Bekijk gratis de handleiding van Steiner Predator 8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd