Standard Horizon Quest GX1500S handleiding

92 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 92
GX1500SPage 10
8 INSTALLATION
8.1 LOCATION
The radio can be mounted at any angle. Choose a mounting location that:
is far enough from any compass to avoid any deviation in compass read-
ing due to the speaker magnet
provides accessibility to the front panel controls
allows connection to a power source and an antenna
has nearby space for installation of a microphone hanger
the antenna must be mounted at least 3 feet from radio
Note: To insure the radio does not affect the compass or radios performance is
not affected by the antenna location, temporarily connect the radio in the de-
sired location and:
a. Examine the compass to see if the radio causes any deviation
b. Connect the antenna and key the radio. Check to ensure the radio is
operating correctly by requesting a radio check.
8.2 ELECTRICAL CONNECTIONS
CAUTION
Reverse polarity connections will damage the radio!
Connect the power cord and antenna to the radio. Antenna and Power Supply
connections are as follows (see Figure 1):
1. Mount the antenna at least 3 feet away from the radio. At the rear of the
radio, connect the antenna cable.
2. Connect the red power wire to a 13.8 VDC ±20% power source. Connect
the black power wire to a negative ground.
Figure 1. General Installation
GPS Navigation Receiver
Accessory Cable
Optional Speaker
Antenna
Fuse
Red
Power Source
Black
Water proof
Deck Outlet
Optional CMP25 RAM+ Mic.

Bekijk gratis de handleiding van Standard Horizon Quest GX1500S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkStandard Horizon
ModelQuest GX1500S
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9601 MB