Standard Horizon HX850S handleiding
Handleiding
Je bekijkt pagina 17 van 88
Page 17HX850S
4.3 CONNECTING A CHART PLOTTER TO THE CD-38
The CD-38 contains three wires that are used to input or output NMEA infor-
mation when the HX850S is inserted into the cradle.
The HX850S outputs the following sentences:
GLL, GGA, GSA, GSV, RMC, DSC and DSE.
The HX850S can receive and display information contained with the following
NMEA sentences from and external GPS or GPS Chart Plotter:
GLL, GGA, and RMC.
Below are the wire colors and description of the wires supplied on the CD-38.
NOTE
When mounting the HX850S inside of a cabin where GPS reception is
limited, the NMEA input (brown) wire may be connected to a GPS Chart
Plotter to input position into the HX850S. To change the HX850S from
using the internal GPS antenna to an external GPS chart plotter with
NMEA refer to section “9.8 POS DATA PRIORITY”.
Brown
Green
Blue
Wire Color/Description
Brown- NMEA Input (+)
Green - NMEA Input
(–)
Blue - NMEA Output (+)
Connection Examples
Connect to NMEA
(+)
output of GPS
Connect to NMEA ground of GPS
Connect to NMEA
(
+
)
input of GPS
If you have further inquires, please feel free to contact Product Support at:
Phone: (800) 767-2450
Email: marinetech@vxstdusa.com
To connect a chart plotter, connect the wires between the CD-38 and the GPS
and chart plotter. Insure that the wires are properly shielded from water.
Connect to NMEA (+) output
Connect to NMEA ground
Connect to NMEA (+) input
Bekijk gratis de handleiding van Standard Horizon HX850S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX850S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11393 MB |
