Standard Horizon HX40 handleiding
Handleiding
Je bekijkt pagina 35 van 52
Page 33
3. Press the [ENT/MENU] key to store the new setting.
4. Press the [CLR/ ] key to return to radio operation.
9.3.6 CONTRAST
The contrast may be adjusted in 30 levels.
1.
Press and hold
[
ENT/MENU
]
“
CONFIG
”
“
CONTRAST
”
2. Press the [▲] or [▼] key to select the de-
sired level. The contrast level can be set
from “1” to “30”
(
“15” is default
)
.
3. Press the [ENT/MENU] key to store the se-
lected level.
4. Press the [CLR/ ] key to return to radio operation.
9.3.7 RESET
The memories and settings of each setup category may be initialized inde-
pendently, or the transceiver may be reset to the original factory settings.
1.
Press and hold
[
ENT/MENU
]
“
CONFIG
”
“
RESET
”
2. Press the [▲] or [▼] key to select the de-
sired category from: “CHANNEL”, “CON-
FIG”, or “ALL”
(
all settings except the ATIS
code will be initialized
)
.
3. Press the [ENT/MENU] key.
4. Press the [▲] key to select “OK?”, then press the [ENT/MENU] key.
9.4 ABOUT...
Displays the version of the software currently operating on the transceiver.
Bekijk gratis de handleiding van Standard Horizon HX40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5154 MB |
