Standard Horizon HX40 handleiding
Handleiding
Je bekijkt pagina 33 van 52
Page 31
9.2.2 EDIT
This selection is used to edit the FM Broadcast frequency and name.
1.
Press and hold
[
ENT/MENU
]
“
FM SETUP
”
“
EDIT
”
2. Press the [▲] or [▼] key to select the
memory to be edited, then press the [ENT/
MENU] key.
3. Use the same procedure as described in steps 3 to 11 of “ADD” in the
previous section.
9.2.3 DELETE
This selection can delete the frequency data stored on an FM Broadcast memory.
1.
Press and hold
[
ENT/MENU
]
“
FM SETUP
”
“
DELETE
”
2. Press the [▲] or [▼] key to select the
memory to be deleted, then press the [ENT/
MENU] key.
The delete conrmation screen will appear.
3. Press the [▲] or [▼] key to select “OK?”
(
delete
)
or “CANCEL”
(
cancel
)
,
then press the [ENT/MENU] key.
9.3 CONFIG
9.3.1 KEY BEEP
This selection is used to select the beep tone volume level when a key is
pressed.
1.
Press and hold
[
ENT/MENU
]
“
CONFIG
”
“
KEY BEEP
”
2. Press the [▲] or [▼] key to select the de-
sired level. The beep level can be set from
“1” to “5”, or “OFF”.
3. Press the [ENT/MENU] key to store the se-
lected level.
4. Press the [CLR/ ] key to return to radio operation.
Bekijk gratis de handleiding van Standard Horizon HX40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5154 MB |
