Standard Horizon HX40 handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 52
Page 13
LCD Display
The display shows the current operating conditions
(
See the LCD indica-
tors illustrated on page 14
)
.
Microphone
The internal microphone is located here.
When transmitting, position the microphone about 1/2 to 1 inch
(
1.2 ~
2.5 cm
)
away from your mouth. Speak slowly and clearly into the micro-
phone.
Keypad
p
(
UP
)
Key
Press this key to change the operating channel, the audio volume level,
or the squelch threshold level.
Pressing the key momentarily, will increase the channel
(
or level
)
one
step. Holding the key, will increase the channel
(
or level
)
continuously.
q
(
DOWN
)
Key
Press this key to change the operating channel, the audio volume level,
or the squelch threshold level.
Press the key momentarily, will decrease the channel
(
or level
)
one step.
Holding the key, will decrease the channel
(
or level
)
continuously.
t
&
u
Keys
When the soft keys are displayed on the channel display screen, press
these keys to select the soft key functions.
NOTE: The soft keys can be customized using the Setup Menu mode
described in section8.12 Soft Keys”. When one of the soft keys is
pressed briey, the functions will appear at the bottom on the display.
Press these keys to toggle the on-screen menus right or left.
ENT/MENU Key
Press to access MENU.
Pressing while the soft keys are displayed will enter the selected soft key.
Secondary use:
Press and hold to access SETUP Mode.
CLR/
Key
Press this key to cancel a function or menu selection.
Secondary use:
Press and hold this key to lock or unlock the keypad.
SQL/VOL Key
Press this key to enable the audio volume adjustment.
Then press this key again to enable the squelch threshold level adjustment.

Bekijk gratis de handleiding van Standard Horizon HX40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkStandard Horizon
ModelHX40
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5154 MB