Standard Horizon HX320 handleiding
Handleiding
Je bekijkt pagina 25 van 60
Page 23
CH12
CH09
CH1001
CH15
CH1018
CH1022
CH1061
CH1078
CH68
CH88
Memory Scan (M-SCAN)
Priority Channel
CH12
CH09
CH1001
CH15
CH1018
CH1022
CH1061
CH1078
CH68
CH88
Priority Scan (P-SCAN)
8.9.3 SCANNING OPERATION
Memory Scanning (M-SCAN)
1. Set the scan type to “M-SCAN” in the SETUP menu (refer to “8.9.2
SELECTING SCAN TYPE”).
2. Press the [SQL] switch, then press the [▲] or [▼] key until the squelch
background noise disappears.
3. Press one of the soft keys.
4. Press the [◄] or [►] key repeatedly, until the [SCAN] soft key is displayed
at the bottom of the LCD.
5. Press the [SCAN] soft key. “MEM SCAN”
will appear on the display. Scanning will
proceed from the lowest to the highest
programmed channel number and preset
channel (described in the next section).
Scanning will stop on a channel when a
transmission is received.
The channel number will blink during
reception.
6. To stop scanning, press the [16/S] or [CLR/ ] key.
Priority Scanning (P-SCAN)
1. Set the scan type to “P-SCAN” in the SETUP menu (refer to “8.9.2
SELECTING SCAN TYPE”).
2. Press the [SQL] switch, then press the [▲] or [▼] key until the squelch
background noise disappears.
3. Press one of the soft keys.
4. Press the [◄] or [►] key repeatedly, until the [SCAN] soft key is displayed
at the bottom of the LCD.
5. Press the [SCAN] soft key. “PRI SCAN” appears on the display. Scanning
will proceed between memory channels, the preset channels, and the
priority channel.
The priority channel will be scanned after each programmed channel.
6. To stop scanning, press the [16/S] or [CLR/ ] key.
Bekijk gratis de handleiding van Standard Horizon HX320, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX320 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5720 MB |
