Standard Horizon HX270S handleiding
Handleiding
Je bekijkt pagina 18 van 44
HX270SPage 16
5.2 RECEPTION
1. Turn the POWER/VOLUME CONTROL knob clockwise to turn the trans-
ceiver on.
2. Press the SQL key, then press the
[
]
key until the
SQL level is 00.
3. Turn up the POWER/VOLUME CONTROL knob until
the noise or audio from the speaker is at a comfort-
able level.
4. Select a channel that has no signal being received (no one is transmit-
ting on the channel) and where only noise is heard.
5. Press the SQL key, then press the
[
]
key and stop immediately after
the noise disappears. This condition is known as the “Squelch Thresh-
old.” If the
squelch
is set to a higher level, weak signals may not be
received.
6. To change channels, press the
[
]
or
[
]
key.
7. The LCD and keypad are illuminated for 5 seconds when any key is
pressed. The lamp automatically turns off in 5 seconds.
8. To “lock” the channel so that it is not accidentally changed, hold down
the H/L key for about one second. This locks the
[
]
and
[
]
buttons
and all the front panel controls except the H/L, PTT and SQL keys. The
“
” symbol will appear on the display to indicate
that the keypad is locked. Hold down the H/L key for
about one second to unlock the keys. The “
” sym-
bol will disappear from the display.
Bekijk gratis de handleiding van Standard Horizon HX270S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX270S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3449 MB |
