Standard Horizon HX210 handleiding
Handleiding
Je bekijkt pagina 35 van 52
Page 33
9.3.6 BACKLIT TIMER
This menu selection is used to setup the illumination time of the display and keypad.
1. Press and hold the [MENU/SET] key.
2.
Press the [▲] or [▼] key to select “CONFIG”, then press the [SELECT] soft
key.
3.
Select “BACKLIT TIMER” with the [▲] or [▼] key, then press the [SELECT] soft
key.
4.
Press the [▲] or [▼] key to select the desired
time.
OFF: Disables the display/key-
pad lamp illumination.
3/5/10/30 Sec: Illuminates the display/keypad for the selected time
when any key (except the PTT switch) is pressed.
CONTINUOUS: Illuminates the display/keypad continuously.
5. Press the [ENTER] soft key to store the selected level.
6. Press the [CLR/
] key to return to radio operation.
9.3.7 CONTRAST
The contrast may be adjusted in 30 levels.
1. Press and hold the [MENU/SET] key.
2.
Press the [▲] or [▼] key to select “CONFIG”, then press the [SELECT] soft
key.
3.
Select “CONTRAST” with the [▲] or [▼] key, then press the [SELECT] soft
key.
4. Press the [▲] or [▼] key to select the de-
sired level. The contrast level can be set
from “1” to “30” (“15” is default).
5. Press the [ENTER] soft key to store the se-
lected level.
6. Press the [CLR/ ] key to return to radio operation.
9.3.8 RESET
The memories and settings of each setup category may be initialized inde-
pendently, or the transceiver may be reset to the original factory settings.
1. Press and hold the [MENU/SET] key.
2.
Press the [▲] or [▼] key to select “CONFIG”, then press the [SELECT] soft
key.
3. Select “RESET” with the [▲] or [▼] key, then press the [SELECT] soft
key.
Bekijk gratis de handleiding van Standard Horizon HX210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX210 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5060 MB |
