Standard Horizon HX210 handleiding
Handleiding
Je bekijkt pagina 30 van 52

Page 28
9.1.5 SCAN RESUME
This selection is used to select the time the HX210 waits after a transmission
ends before the radio starts to scan channels again. The default setting is 2
seconds.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CHANNEL SETUP”, then press the
[SELECT] soft key.
3. Select “SCAN RESUME” with the [▲] or [▼] key, then press the [SELECT]
soft key.
4. Press the [▲] or [▼] key to select the de-
sired time. The resume time can be set to
“1 sec” through “5 sec”.
5. Press the [ENTER] soft key to store the new
setting.
6. Press the [CLR/ ] key to return to radio operation.
9.1.6 MULTI WATCH
This selection is used to choose between “Dual Watch” and “Triple Watch”.
Refer to section “8.10.1 Setting up the Multi Watch Operation” for details.
9.1.7 PRIORITY CH
This procedure may be used to designate a different priority channel when
priority scanning. By default, the radio priority channel is set to Channel 16.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CHANNEL SETUP”, then press the
[SELECT] soft key.
3. Select “PRIORITY CH” with the [▲] or [▼] key, then press the [SELECT]
soft key.
4. Press the [▲] or [▼] key to select the de-
sired channel to be a priority.
5. Press the [ENTER] soft key to store the new
setting.
6. Press the [CLR/ ] key to return to radio operation.
9.1.8 SUB CH
By default, the sub channel is set to Channel 9. This procedure allows the
radio to assign a different sub channel for instant access.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select “CHANNEL SETUP”, then press the
[SELECT] soft key.
3.
Select “SUB CH” with the [▲] or [▼] key, then press the [SELECT] soft key.
Bekijk gratis de handleiding van Standard Horizon HX210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | HX210 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5060 MB |







