Standard Horizon CP170C handleiding
Handleiding
Je bekijkt pagina 25 van 86
GPS Chart 160/170C Page 27
Select RTCMxxxx by pressing: ‘‘MENU’ + “ADVANCED SETUP” + ‘ENTER’ + “INPUT/OUTPUT” + ‘ENTER’ + “NMEA 2/RTCM INPUT” + ‘ENTER’
Select the sentences to send by pressing ‘MENU’ + “ADVANCED SETUP” + ‘ENTER’ + “INPUT/OUTPUT” + ‘ENTER’ + “NMEA 2 OUTPUT” + ‘ENTER’: ‘
EXTERNAL NMEA
DEVICE
DIFFERENTIAL BEACON
RECEIVER
Gray
>
Green
Black
Blue
Gray
White
>
>
Green
NMEA Input/Output -
NMEA Output +
NMEA Input -
Green
>
Gray
RTCM signal +
RTCM signal -
MULTI
reset
Horizon MD150 MULTIDATA
AUTOPILOT
Yellow
>
Green
NMEA Input -
NMEA Input +
Select the sentences to send by pressing: ‘‘MENU’ + “ADVANCED SETUP” + ‘ENTER’ + “INPUT/OUTPUT” + ‘ENTER’ + “AUTOPILOT OUTPUT” + ‘ENTER’
CONNECTION EXAMPLE for NMEA 2/RTCM
CONNECTION EXAMPLE for AUTOPILOT NMEA 3
4.1.3 Turning the chartplotter On and Off
Before powering On the chartplotter, check for the correct voltage (10-35 volt dc), the
correct polarity and be sure that the supplied 1A Fuse is wired in series on the PWR -
(Black) wire:
Bekijk gratis de handleiding van Standard Horizon CP170C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Standard Horizon |
| Model | CP170C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7408 MB |
