Stamos S-MMA 250 IGBT handleiding
Handleiding
Je bekijkt pagina 13 van 56
13
Rev. 03.01.2018
3.3 CONNECTING THE DEVICE
3.3.1 Connecting the power
• Connection of the device must be performed by a qualied person. In addition, a person with required
qualications should check if the earthing or electrical installation with protection system is in line with
the safety regulations and if they operate correctly.
• The device must be placed near the work station.
• Connection of excessively long conduits to the machine must be avoided.
• One-phase welders should be connected to the socket tted with an earthing prong.
• Welders powered from a 3-Phase network are delivered without a plug, the plug must be obtained
independently and installation should be assigned to a qualied person.
PLEASE NOTE! THE DEVICE MAY ONLY BE USED UPON CONNECTION TO AN INSTALLMENT WITH
A PROPERLY FUNCTIONING FUSE
4. OPERATION
Covers all models:
EN
1 2
3
4
5
6
1. Mass conduit connector
2. MMA = electric arc welding (MMA) is one of the earliest methods of metal objects welding; it is
also in use nowadays. Welding energy is generated by the electric arc between the consumable
electrode and welded element.
3. ERROR INDICATOR = The indicator lights in the following two situations:
a) If the machine has malfunctioned and cannot be operated.
b) If the cutting device has exceeded the standard working time the protection mode is initiated
and the machine will stop functioning. This means that the machine is now being cooled in order
to be able to restore temperature control again after the device has overheated. Therefore the
machine is stopped. During this process, the red warning light on the front panel lights up. In this
case it is not necessary to remove the power plug from the socket. The ventilation system may
be left on in order to enhance the cooling of the machine. When the red light goes dark, this
means that the temperature is now down to the normal level and the unit can be put back into
operation.
4. Power supply indicator
5. CURRENT = main current adjustment
6. On/off switch– at the back of the device
Bekijk gratis de handleiding van Stamos S-MMA 250 IGBT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stamos |
| Model | S-MMA 250 IGBT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5605 MB |
