Stairville SonicPulse MH Wash 1208 handleiding

Verlichting

Stairville

44 pagina's

PDF beschikbaar

Handleiding

7.2.5 Pre-programmed automatic show

A pre-programmed automatic show can only be activated if the device is operating

in stand-alone mode or as the master in a master/slave conguration and if the

device is not controlled via a DMX controller.

1. Press [Mode] to activate the main menu.

2. Press [Mode] or [Up]/[Down] until the display shows ‘Program’ .

3. Press [Setup] to conrm the selection.

4. Press [Up]/[Down] to select a pre-programmed automatic show.

The following pre-programmed automatic shows are available:

Menu level 2 Menu level 3 Function

‘Pan’ ‘000’ … ‘255’ Species a xed pan angle.

‘Tilt’ ‘000’ … ‘255’ Species a xed tilt angle.

‘Mode’ ‘01’ … ‘15’ Selects a show between 01 and 15.

‘Color:(Mode:1)’ ‘01’ … ‘33’ Turns on a show with a constant

colour.

‘Speed:

(Mode:2-15)’

‘000’ … ‘255’ Turns on a show with a colour

change.

‘Strobe’ ‘0’ … ‘10’ No function

‘11’ … ‘127’ Turns on a show with a linear strobe

eect with increasing speed.

‘128’ … ‘255’ Turns on a show with a random

strobe eect with increasing speed.

‘Motor Auto’ ‘On’ Turns automatic mode on.

‘O’ Turns automatic mode o. The head

remains in one position.

5. Press [Setup] to conrm the selection.

The automatic show starts immediately.

Operating

SonicPulse MH Wash 1208

Moving Head

Bekijk gratis de handleiding van Stairville SonicPulse MH Wash 1208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.